The heatless regenerative dryer can adsorb some component characteristics by adsorption porous surface, and adsorb the moisture in the air to the sorbent cavity, so as to remove the moisture in the air. When the adsorption is worked for a certain time, the adsorbents will reach the saturated adsorption equilibrium, and the adsorbents need to be regenerated with the dry gas near the normal pressure to restore the adsorbability of the adsorbents. Because the adsorbent can be adsorbed and recycled, the heatless regeneration dryer can run continuously and safely.
The Compressed air is an advanced device that uses pressure swing adsorption to dry aluminum oxide or molecular sieves with high water absorption. The drying effect is achieved by changing the pressure, heat-free regenerative Compressed Air Dryer (heat-free regenerative Compressed air dryer) is an adsorption drying device, which is based on the principle of Pressure swing adsorption, the use of micro-porous desiccant adsorption of water molecules to dry Compressed air equipment. Heat-free regenerative dryer can adsorb part of the porous surface, the moisture in the air adsorption chamber to remove moisture in the air. When the adsorbents reach the saturated adsorption equilibrium after a certain time, the adsorbents need to be regenerated in dry gas near atmospheric pressure in order to recover the adsorbability of the adsorbents. Since the ADSORBENT can be adsorbed and recovered, the heat-free Regenerative Dryer can operate continuously and safely. . .
capacity: | 1~500Nm3/min |
Operationg pressure. | 0.2~1.0MPa(can provide1.0~3.0MPa) |
Inlet air Temperature: | ≤45°C(Min5″C) |
Dew Point: | ≤-40°C–70*C(at normal pressure) |
Switching time. | 120min(adjustable) |
Air pressure loss. | ≤0.02MPa |
Regenerative air consumption | ≤10% |
Regenerative mode | Micro heat regeneration |
Power Supply. | AC 380V/3P/50Hz(BXH-15 and above) AC 220V/1P/50Hz(BXH-12 and below) |
Environment Temperature. | ≤45*C(Min5°C) |