Products
-
PSA oxygen generator – oxygen generating equipment – high purity oxygen generator
Compressed air purification group
The compressed air provided by the air compressor is first passed into the compressed air purification component. The compressed air is first removed from most of the oil, water and dust by the pipeline filter, and then further removed from water by the freeze dryer, oil removal and dust removal by the fine filter, and then deeply purified by the ultra-fine filter. According to the working conditions of the system, Uniergy gas specially designed a set of compressed air oil remover to prevent possible trace oil penetration and provide adequate protection for the molecular sieve. The carefully designed air purification components ensure the service life of the molecular sieve. The clean air treated by this component can be used for instrument air. -
High Purity oxygen generator oxygen generator manufacturers
Pressure swing adsorption oxygen generator is an automatic equipment that uses zeolite molecular sieve as adsorbent and uses the principle of pressure adsorption, pressure reduction and desorption to adsorb and release oxygen from the air, so as to separate oxygen. Zeolite is a kind of porous adsorption material processed by special technology. Its surface and interior are covered with microporous spherical granular adsorbent, which is light yellow. Its pore characteristics enable it to realize the kinetic separation of oxygen and nitrogen. The separation effect of zeolite molecular sieve on oxygen and nitrogen is based on the slight difference in the kinetic diameter of the two gases.
-
Container Type Oxygen Generator, container type oxygen generator
A container type medical application oxygen generation system, including a base plate (1), its characteristics is described on the floor (1) is equipped with air compressor (2), as described in turn connect air compressor (2) purification unit, air buffer tank (4), oxygen generator (5), process tank (6), oxygen compressor (7) and an oxygen tank (8), The purification unit comprises a cold drying machine (26) and a purification machine (3); The cold drying machine (26) and purification machine (3) connecting the pipeline is provided with a precision filter (9); The air compressor (2), oxygen tank (8) and oxygen compressor (7) are located on the same side, the purification unit, air buffer tank (4), oxygen machine (5) and process tank (6) are located on the other side; The bottom plate (1) is also provided with a central control system (15).
-
Plateau oxygen generator – tunnel oxygen generator
Pressure swing adsorption oxygen generator is an automatic equipment that uses zeolite molecular sieve as adsorbent and uses the principle of pressure adsorption, pressure reduction and desorption to adsorb and release oxygen from the air, so as to separate oxygen. Zeolite is a kind of porous adsorption material processed by special technology. Its surface and interior are covered with microporous spherical granular adsorbent, which is light yellow. Its pore characteristics enable it to realize the kinetic separation of oxygen and nitrogen. The separation effect of zeolite molecular sieve on oxygen and nitrogen is based on the slight difference in the kinetic diameter of the two gases.
-
Molecular sieve oxygen generator – can be placed in container for convenient transportation
Easy installation
The equipment is compact in structure, integral skid-mounted, covers a small area without capital construction investment, less investment.High quality zeolite molecular sieve
It has large adsorption capacity, high compressive performance and long service life.Fail-safe system
Configure system alarm and automatic start function for users to ensure the safety of system operation
More economical than other forms of oxygen supply -
PSA oxygen generator fresh water aquaculture high purity oxygen generator
1.PSA oxygen generator adopts high-quality zeolite molecular sieve as adsorbent and uses the principle of pressure swing adsorption(PSA) to obtain oxygen directly from compressed air.
2.A full installation requires air compressor, refrigerated air dryer, filters, air tank, oxygen generator and gas buffer tank. -
High density oil-water separator
Through cyclone separation, inertia collision and gravity sedimentation, the oil, water and dust in the Compressed air can be removed up to 98% or more by directly blocking the oil and water in the Compressed air.
Capccity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa(can provide1.0-3.0MPa)
Inlet air Temperature:≤50℃(Min5℃)
Oil content:≤0.1~0.01ppm
Vapor-liquid separation efficiency:≥98％
Pressure Loss:≤0.02MPa
ambient temperature:≤45℃
Service life:≥8000H -
Degreasing agent, high efficiency degreasing agent, new degreasing type
Cyclone separation, pre-filtration and fine filtration are integrated into a three-stage purification system. The oil in the Compressed air is directly cut off. Through cyclone separation, gravity settlement, coarse filter core and fine filter core layer filtration, oil, water and dust in the Compressed air are completely removed, the filter precision of the treated Compressed air is 0.1 um and the residual oil is less than 0.01 PPM.
Capccity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa(can provide1.0-3.0MPa)
Inlet air Temperature:≤50℃(Min5℃)
Oil content:≤0.1~0.01ppm
Vapor-liquid separation efficiency:≥98％
Pressure Loss:≤0.02MPa
ambient temperature:≤45℃
Service life:≥8000H -
Precision filter
The product is mainly used to remove oil,liquid water and dust from compressed air. Lt has high efficiency ,convenient and low operating cost .
This Product is divided into C、T、A three levels according to different stages ,C Filtration Precision≤3um,Remove 99.999％ Flow moisture, A Filtration precision≤0.01um, Remove 99.9％Flow moisture.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa
Inlet air Temperature:≤50℃ (Min 5℃)
Pressure Loss:≤0.02MPa
Service life:≥8000h -
Filter, sterilizing filter, sterilizing filter
The filter element is made of an over mouth hydrophobic polytetrafluoroethylene material, and the sterile Compressed air is produced by coagulation and separation. The utility model is an ideal gas organic solvent filter for removing bacteria. Mainly used in pharmaceutical, fermentation, food and beverage, beer brewing, biological goods and other industries.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa
Inlet air Temperature:≤50℃ 0~120℃
Pressure Loss:≤0.02MPa
Filtration accuracy:≤0.1um
Medium:Air Nitrogen -
Water-Cooled High-Efficiency Air Cooler, Water-Cooled Cooler
Using advanced bimetallic finned tube as condensing tube in national aviation industry, the heat dissipation area is greatly increased under the same volume, the cooling efficiency is high, and the suitable industrial and mining scope is wide. It is an ideal cooling tool for Compressed air.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.2~1.0MPa(can provide1.0~3.0mpa)
Inlet air Temperature:≤180℃
Outlet air Temperature:≤42℃
Environment Temperature:≤32℃
Pressure Loss:≤0.02MPa -
Air-cooled Dryer, water-cooled Dryer, Dryer
According to the principle of freezing and dehumidifying, the Compressed air heat is exchanged through the evaporator, so that the gaseous water of the Compressed air condenses into liquid water and is discharged from the machine through the air-water separator.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.6~1.0MPa（can provide1.0~3.0mpa）
Inlet air Temperature:Normal temperature≤45℃;High temperature≤80℃
Cooling method:Air-cooled;Water-cooled
Dew point:≤-23℃(Normal pressure dew point)
Environment Temperature:≤42℃
Pressure Loss:≤0.02MPa
Installation method: indoor installation
