Manufacturer for Air Compressor Desiccant Dryer - Industrial Portable Heatless Adsorption Air Compressed Dryer For Sale – Kejie
Manufacturer for Air Compressor Desiccant Dryer - Industrial Portable Heatless Adsorption Air Compressed Dryer For Sale – Kejie Detail:
Product Details
The heatless regenerative dryer can adsorb some component characteristics by adsorption porous surface, and adsorb the moisture in the air to the sorbent cavity, so as to remove the moisture in the air. When the adsorption is worked for a certain time, the adsorbents will reach the saturated adsorption equilibrium, and the adsorbents need to be regenerated with the dry gas near the normal pressure to restore the adsorbability of the adsorbents. Because the adsorbent can be adsorbed and recycled, the heatless regeneration dryer can run continuously and safely.
The Compressed air is an advanced device that uses pressure swing adsorption to dry aluminum oxide or molecular sieves with high water absorption. The drying effect is achieved by changing the pressure, heat-free regenerative Compressed Air Dryer (heat-free regenerative Compressed air dryer) is an adsorption drying device, which is based on the principle of Pressure swing adsorption, the use of micro-porous desiccant adsorption of water molecules to dry Compressed air equipment. Heat-free regenerative dryer can adsorb part of the porous surface, the moisture in the air adsorption chamber to remove moisture in the air. When the adsorbents reach the saturated adsorption equilibrium after a certain time, the adsorbents need to be regenerated in dry gas near atmospheric pressure in order to recover the adsorbability of the adsorbents. Since the ADSORBENT can be adsorbed and recovered, the heat-free Regenerative Dryer can operate continuously and safely. . .
Processing Steps
| capacity: | 1~500Nm3/min |
| Operationg pressure. | 0.2~1.0MPa(can provide1.0~3.0MPa) |
| Inlet air Temperature: | ≤45°C(Min5″C) |
| Dew Point: | ≤-40°C–70*C(at normal pressure) |
| Switching time. | 120min(adjustable) |
| Air pressure loss. | ≤0.02MPa |
| Regenerative air consumption | ≤10% |
| Regenerative mode | Micro heat regeneration |
| Power Supply. | AC 380V/3P/50Hz(BXH-15 and above) AC 220V/1P/50Hz(BXH-12 and below) |
| Environment Temperature. | ≤45*C(Min5°C) |
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Manufacturer for Air Compressor Desiccant Dryer - Industrial Portable Heatless Adsorption Air Compressed Dryer For Sale – Kejie , The product will supply to all over the world, such as: Norway, Stuttgart, Russia, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. On account of superior quality and competitive price , we will be the market leader, please don’t hesitate to contact us by phone or email, if you are interested in any of our products.
By Diana from Brisbane - 2018.11.04 10:32
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Prima from Somalia - 2017.02.28 14:19
