Filtering Device
-
High density oil-water separator
Through cyclone separation, inertia collision and gravity sedimentation, the oil, water and dust in the Compressed air can be removed up to 98% or more by directly blocking the oil and water in the Compressed air.
Capccity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa(can provide1.0-3.0MPa)
Inlet air Temperature:≤50℃(Min5℃)
Oil content:≤0.1~0.01ppm
Vapor-liquid separation efficiency:≥98％
Pressure Loss:≤0.02MPa
ambient temperature:≤45℃
Service life:≥8000H -
Degreasing agent, high efficiency degreasing agent, new degreasing type
Cyclone separation, pre-filtration and fine filtration are integrated into a three-stage purification system. The oil in the Compressed air is directly cut off. Through cyclone separation, gravity settlement, coarse filter core and fine filter core layer filtration, oil, water and dust in the Compressed air are completely removed, the filter precision of the treated Compressed air is 0.1 um and the residual oil is less than 0.01 PPM.
Capccity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa(can provide1.0-3.0MPa)
Inlet air Temperature:≤50℃(Min5℃)
Oil content:≤0.1~0.01ppm
Vapor-liquid separation efficiency:≥98％
Pressure Loss:≤0.02MPa
ambient temperature:≤45℃
Service life:≥8000H -
Precision filter
The product is mainly used to remove oil,liquid water and dust from compressed air. Lt has high efficiency ,convenient and low operating cost .
This Product is divided into C、T、A three levels according to different stages ,C Filtration Precision≤3um,Remove 99.999％ Flow moisture, A Filtration precision≤0.01um, Remove 99.9％Flow moisture.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa
Inlet air Temperature:≤50℃ (Min 5℃)
Pressure Loss:≤0.02MPa
Service life:≥8000h -
Filter, sterilizing filter, sterilizing filter
The filter element is made of an over mouth hydrophobic polytetrafluoroethylene material, and the sterile Compressed air is produced by coagulation and separation. The utility model is an ideal gas organic solvent filter for removing bacteria. Mainly used in pharmaceutical, fermentation, food and beverage, beer brewing, biological goods and other industries.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.4~1.0MPa
Inlet air Temperature:≤50℃ 0~120℃
Pressure Loss:≤0.02MPa
Filtration accuracy:≤0.1um
Medium:Air Nitrogen -
Water-Cooled High-Efficiency Air Cooler, Water-Cooled Cooler
Using advanced bimetallic finned tube as condensing tube in national aviation industry, the heat dissipation area is greatly increased under the same volume, the cooling efficiency is high, and the suitable industrial and mining scope is wide. It is an ideal cooling tool for Compressed air.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.2~1.0MPa(can provide1.0~3.0mpa)
Inlet air Temperature:≤180℃
Outlet air Temperature:≤42℃
Environment Temperature:≤32℃
Pressure Loss:≤0.02MPa -
Air-cooled Dryer, water-cooled Dryer, Dryer
According to the principle of freezing and dehumidifying, the Compressed air heat is exchanged through the evaporator, so that the gaseous water of the Compressed air condenses into liquid water and is discharged from the machine through the air-water separator.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.6~1.0MPa（can provide1.0~3.0mpa）
Inlet air Temperature:Normal temperature≤45℃;High temperature≤80℃
Cooling method:Air-cooled;Water-cooled
Dew point:≤-23℃(Normal pressure dew point)
Environment Temperature:≤42℃
Pressure Loss:≤0.02MPa
Installation method: indoor installation -
Air Cooler, air-cooled high-efficiency Air Cooler, water-cooled high-efficiency Air Cooler
The air cooled high efficiency air cooler is placed behind the compressor to cool the high temperature gas produced by the compressor below 45 °C, remove the large amount of water in the Compressed air, and discharge the machine to meet the operating conditions of the rear equipment. The series of products adapt to a wide temperature range, small size, easy installation, low operating costs, long service life, especially suitable for the use of non-water, water shortage and mobile users.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.2~1.0MPa
Inlet air Temperature:≤160℃
Outlet air Temperature:≤45℃
Environment Temperature:≤35℃
Pressure Loss:≤0.02MPa
