Welcome to Hangzhou Kejie!
Featured
-
Factory Cheap Hot High Pressure Nitrogen Generator - Pressure swing adsorption nitrogen / oxygen production structure process – Kejie
Working Principle According to the principle of pressure swing adsorption, the nitrogen generator uses high-quality carbon molecular sieve as adsorbent to extract nitrogen from the air under a certain pressure. The purified and dried compressed air is adsorbed under pressure and desorbed under reduced pressure in the adsorber. Due to the aerodynamic effect, the diffusion rate of oxygen in the micropores of carbon molecular sieve is much higher than that of nitrogen. Oxygen is preferentia... -
-
-
Wholesale Metallurgical Coal Oxygen Generator - Molecular sieve oxygen generator – can be placed in container for convenient transportation – Kejie
Product Advantage PSA process is a simple method of oxygen production, using air as raw material, energy consumption is only the electric energy consumed by the air compressor, with low operating cost, low energy consumption, high efficiency. Mechanical and electrical integration design to achieve automatic operation Imported PLC control automatic operation. Oxygen flow pressure purity adjustable and continuous display, can set pressure, flow, purity alarm and achieve remote automatic control... -
-
-
-
Good Quality Cryogenic Plantspsa Nitrogen Gas Generators - PSA Nitrogen Generator Skid full sets supplier – Kejie
Nitrogen-making machine is a process in which oxygen and nitrogen are separated by physical means from air to obtain the required gas. Nitrogen machine is based on the principle of pressure swing adsorption, using high-quality carbon molecular sieve as adsorbent, under certain pressure, from the air to produce nitrogen. After purification and drying of Compressed air, pressure adsorption and desorption are carried out in the adsorber. Due to the aerodynamics effect, the diffusion rate of oxyg... -
Manufacturing Companies for Pigo Freeze Dryer - Waste heat regeneration dryer – Kejie
Product Introduction The compressed air waste heat regeneration dryer is a double tower structure, and the tower is filled with adsorbent. When one adsorption tower is in the drying process, the other adsorption tower is in the desorption process. The compressed air waste heat regeneration dryer is mainly composed of the following equipment: two alternately used adsorption towers, a set of silencing system, an air cooler, a set of vapor-liquid separator, optional auxiliary electric heati... -
High Quality Liquid Nitrogen Generator - Principle of PSA nitrogen production – Kejie
The diameter of oxygen molecules is smaller than that of nitrogen molecules, so the diffusion speed is hundreds of times faster than that of nitrogen, so the speed of carbon molecular sieve adsorption of oxygen is also very fast, adsorption about 1 minute to reach more than 90%; At this point, nitrogen adsorption is only about 5%, so it’s mostly oxygen, and the rest is mostly nitrogen. In this way, if the adsorption time is controlled within 1 minute, oxygen and nitrogen can be initiall... -
-
professional factory for Domestic Freeze Dryer - Refrigerated Compressed Air Dryer – Kejie
Basic Info 1.Working principle According to the principle of freezing and dehumidification,The hot and humid compressed air is exchanged for heat through an evapora-tor,so that the gaseous moisture of the compressed air condenses into liquid water.form liquid water through gas-water separation,and dis-charge it through the gas-water separator. 2.Technical Index Capacity:1~300Nm3/min Operationg pressure:0.2~1.0MPa(can provide 1.0~3.0MPa) Dew Point:≤-23℃ Cooling Method:Water-cooling Inlet ...
