Product Introduction
The compressed air waste heat regeneration dryer is a double tower structure, and the tower is filled with adsorbent. When one adsorption tower is in the drying process, the other adsorption tower is in the desorption process.
The compressed air waste heat regeneration dryer is mainly composed of the following equipment: two alternately used adsorption towers, a set of silencing system, an air cooler, a set of vapor-liquid separator, optional auxiliary electric heati...
Basic Info
1.Working principle
According to the principle of freezing and dehumidification,The hot and humid compressed air is exchanged for heat through an evapora-tor,so that the gaseous moisture of the compressed air condenses into liquid water.form liquid water through gas-water separation,and dis-charge it through the gas-water separator.
2.Technical Index
Capacity:1~300Nm3/min
Operationg pressure:0.2~1.0MPa(can provide 1.0~3.0MPa)
Dew Point:≤-23℃
Cooling Method:Water-cooling
Inlet ...
Product Details
According to the oxygen generation system of container medical shelter mentioned in Requirement 1, its characteristics are that the bottom plate (1) is respectively provided with a door plate (10), a front plate (11), a front side plate (12), a rear side plate (13) and a top plate (14). The bottom plate (1), door plate (10), front plate (11), front side plate (12), rear side plate (13) and roof (14) form a sealed container body. The front side plate (12) is provided with ...
Product Advantage
PSA process is a simple method of oxygen production, using air as raw material, energy consumption is only the electric energy consumed by the air compressor, with low operating cost, low energy consumption, high efficiency.
Mechanical and electrical integration design to achieve automatic operation
Imported PLC control automatic operation. Oxygen flow pressure purity adjustable and continuous display, can set pressure, flow, purity alarm and achieve remote automatic control...
Working Principle
According to the principle of pressure swing adsorption, the nitrogen generator uses high-quality carbon molecular sieve as adsorbent to extract nitrogen from the air under a certain pressure. The purified and dried compressed air is adsorbed under pressure and desorbed under reduced pressure in the adsorber. Due to the aerodynamic effect, the diffusion rate of oxygen in the micropores of carbon molecular sieve is much higher than that of nitrogen. Oxygen is preferentia...
Product Introduction
The compressed air waste heat regeneration dryer is a double tower structure, and the tower is filled with adsorbent. When one adsorption tower is in the drying process, the other adsorption tower is in the desorption process.
The compressed air waste heat regeneration dryer is mainly composed of the following equipment: two alternately used adsorption towers, a set of silencing system, an air cooler, a set of vapor-liquid separator, optional auxiliary electric heati...
Product Advantage
PSA process is a simple method of oxygen production, using air as raw material, energy consumption is only the electric energy consumed by the air compressor, with low operating cost, low energy consumption, high efficiency.
Mechanical and electrical integration design to achieve automatic operation
Imported PLC control automatic operation. Oxygen flow pressure purity adjustable and continuous display, can set pressure, flow, purity alarm and achieve remote automatic control...